Contact Us

(111) - 222-3333

9 AC Service Tips | DIY AC Maintenance

As the summers soar, air conditioners become our best friends to deal with the hottest days, keeping your home and mind cool and calm. But as much as it provides you relief, it also demands care. To keep your air conditioner running smoothly, regular maintenance is important. It doesn’t matter if you’re a seasoned DIY enthusiast or just a beginner, our 9 effective Air Conditioning Service Tips will keep your air conditioner in top-notch condition. Learn more about the important yet simple AC service tips to maintain a cool and energy-efficient home all summer. 


Understanding Air Conditioner: How It Works: 


Understanding how an Air conditioner works is crucial before delving into the AC maintenance tips. The air conditioner works by drawing out heat from indoor air and throwing it outside, making your room cool and comfortable. This procedure starts with a refrigerant, a chemical compound like hydrofluorocarbon (HFC) which can absorb heat from the surrounding air as it circulates through the system. The warm air is drawn inside the indoor unit and passed over the evaporator coils which absorb the heat energy from the air and turn it into gas from liquid.
This cooled air, through the AC vents, is blown back into the room, making it cooler and comfortable. The cycle repeats, effectively cooling down your space in a short while.


9 AC Service Tips to Improve Air Conditioner’s Efficiency:


Air conditioners not working properly, especially at times of high humidity levels can be frustrating and inconvenient. To prevent this, taking good care of your air conditioner is crucial as it not only saves your money in the long run but also proves to be energy efficient. A maintained AC consumes less energy and performs up to the mark. 

Here are 9 effective AC service tips to improve the air conditioner’s efficiency and keep it in prime condition for a long span.  


Tip 1:  Clean Condenser:


Make sure to clean the condenser unit every once in a while, and remove all the leaves, debris, and dirt for enhanced and optimal AC performance. 


  • Why: Condenser unit cleaning helps your air conditioner perform well as all the dirt, and debris get removed or cleaned. 
  • How: Remove all the dirt or obstruction and gently wash the condenser fins.


Detailed Steps to Clean the Condenser:

  1. Turn Off the Power:
    • Ensure the power to the AC unit is turned off to prevent any accidents.
  2. Remove Debris:
    • Clear away any leaves, grass, or debris from around the condenser unit.
  3. Clean the Fins:
    • Use a soft brush or vacuum with a brush attachment to clean the fins. Be gentle to avoid bending them.
    • If necessary, use a fin comb to straighten any bent fins.
  4. Wash the Unit:
    • Gently hose down the unit to remove any remaining dirt. Avoid using high pressure to prevent damage to the fins.
  5. Inspect for Damage:
    • Check the unit for any signs of damage or wear and address them accordingly.




Tip 2: Replace Air Filters: 


Regularly clean or replace the filter to maximize the air conditioner’s efficiency. 


  • Why: Cleaning air filters helps with improved airflow and better cooling. 
  • How: Check and clean the air filters once a month, and replace them every 1-3 months.


Detailed Steps to Replace Air Filters:

  1. Turn Off the AC:
    • Ensure the AC unit is off before removing the filter.
  2. Locate the Filter:
    • Open the access panel to locate the air filter.
  3. Remove and Inspect:
    • Remove the filter and inspect it for dirt and debris. If it’s reusable, clean it with water and let it dry completely. If it’s disposable, replace it with a new one.
  4. Install the Filter:
    • Insert the clean or new filter, ensuring it is placed correctly according to the airflow direction indicated on the filter.
  5. Close the Panel and Turn On the AC:
    • Close the access panel and turn the AC back on.



Tip 3: Clean Evaporator Coils: 


Get the evaporator coils cleaned by a professional once a year for smooth and efficient AC performance.


  • Why: Enhance the cooling performance and ensure better airflow. 
  • How: Consider consulting/hiring an HVAC technician annually for expert cleaning. 


Detailed Steps to Clean Evaporator Coils:

  1. Turn Off the Power:
    • Disconnect the power from the AC unit to ensure safety.
  2. Access the Coils:
    • Remove the access panel to expose the evaporator coils.
  3. Brush Off Debris:
    • Use a soft brush to gently remove dust and debris from the coils.
  4. Use Coil Cleaner:
    • Apply a no-rinse coil cleaner to the coils. Let it foam and sit as per the instructions.
  5. Rinse if Necessary:
    • If required, rinse the coils gently with water, ensuring not wet other components.
  6. Reassemble and Test:
    • Reassemble the unit and restore power. Test the AC for proper cooling.



Tip 4: Install a Programmable Thermostat: 


Install a programmable thermostat to set the temperature according to your routine for less energy consumption. 


  • Why: Ensures energy efficiency and enhances the overall performance of the air conditioner. 
  • How: Set the temperature according to your schedule or routine for maximum savings and comfort.


Detailed Steps to Install a Programmable Thermostat:

  1. Turn Off Power:
    • Turn off the power to your HVAC system at the circuit breaker.
  2. Remove Old Thermostat:
    • Detach the old thermostat from the wall, being careful to note the wiring configuration.
  3. Install the New Thermostat:
    • Connect the wires to the new programmable thermostat according to the manufacturer’s instructions.
    • Mount the new thermostat on the wall.
  4. Set Up the Thermostat:
    • Follow the setup instructions to program the thermostat according to your schedule.
  5. Test the System:
    • Turn the power back on and test the thermostat to ensure it’s controlling the HVAC system properly.



Tip 5: Inspect Ductwork: 


Check the ductwork to ensure no leaks, and seal them properly if any are found. Leaky ducts can cause air loss and lead to reduced efficiency.  


  • Why: Identification of the leaky ducts can lead to enhanced efficiency. 
  • How: Check the leaks regularly and seal them if found any, for better AC performance. 


Detailed Steps to Inspect and Seal Ductwork:

  1. Turn Off the System:
    • Ensure the HVAC system is off before inspecting the ductwork.
  2. Inspect for Leaks:
    • Examine the ducts for any visible gaps, holes, or disconnected sections.
  3. Seal Leaks:
    • Use duct tape or mastic sealant to seal any leaks. Pay special attention to joints and connections.
  4. Insulate Ducts:
    • Insulate the ducts, especially those running through unconditioned spaces, to prevent energy loss.



Tip 6: Check Ventilation: 


Identify proper ventilation by checking vents are not blocked by any object or furniture. This can also impact the airflow. 


  • Why: It stops the airflow blockages through any object for better AC performance. 
  • How: Ensure no furniture or other objects are blocking the vents. 


Detailed Steps to Check Ventilation:

  1. Inspect Vents:
    • Check all vents and registers to ensure they are not obstructed by furniture, curtains, or other objects.
  2. Clean Vents:
    • Remove the vent covers and clean them with a vacuum or damp cloth to remove dust and debris.
  3. Ensure Proper Airflow:
    • Arrange furniture to ensure there is adequate space around each vent for proper airflow.



Tip 7: Check Leaks or Cracks: 


Check all the leaks or cracks in your room because they significantly contribute to the inefficiency of the AC, escalating the cool air outwards. 


  • Why: It prevents cooling from escaping outside through holes, cracks, or leaks. 
  • How: Check the walls, windows, and doors, and seal all the gaps if any to improve efficiency and achieve a well-maintained temperature. 


Detailed Steps to Check and Seal Leaks:

  1. Inspect for Gaps:
    • Look for gaps or cracks around windows, doors, and walls where cool air could escape.
  2. Seal Cracks:
    • Use caulk or weatherstripping to seal any identified gaps.
  3. Install Door Sweeps:
    • Install door sweeps to prevent air from escaping under exterior doors.



Tip 8: Keep the Condensor Unit Under Shade: 


Try to keep the condenser unit of your AC under a shade for enhanced efficiency and to protect it from extreme sunlight. 


  • Why: It prevents the condenser unit from extreme sunlight. 
  • How: Keep the condenser unit under a shade or install a protective cover. 


Detailed Steps to Shade the Condenser Unit:

  1. Choose a Shaded Spot:
    • If possible, place the condenser unit in a naturally shaded area.
  2. Install a Shade:
    • If the unit is already installed, consider installing a shade structure or planting trees to provide natural shade.
  3. Ensure Proper Airflow:
    • Make sure the shade structure doesn’t obstruct airflow to the unit.



Tip 9: Ensure Regular Maintenance: 


Make sure to schedule a yearly regular maintenance check with an expert HVAC technician to identify minor problems before they can turn into major issues. 


  • Why: It helps identify problems at a minor level before they can escalate into a major issue. 
  • How: Hire a professional HVAC expert from AOne Technical for a regular maintenance check-up. 


Following these 9 effective tips for AC maintenance can improve your air conditioner’s efficiency, consume less energy, and contribute to reduced electricity bills. 


Detailed Steps for Regular Maintenance:

  1. Schedule Annual Check-ups:
  2. Perform Routine Tasks:
    • In between professional check-ups, perform routine maintenance tasks like cleaning filters and checking for leaks.
  3. Keep Records:
    • Maintain records of all maintenance activities to track the health of your AC system.


Air Conditioner Maintenance Checklist:


Are you worried about the home AC maintenance tips? Not anymore! Here’s an essential Air conditioner maintenance tips checklist to keep your air conditioner in prime condition. So save both your time and money and maximize most of your air conditioner with our AC service tips checklist. 



  1. Condenser unit cleaning.
  2. Clean air filters regularly. 
  3. Clean evaporator coils.
  4. Install a programmable thermostat.
  5. Inspect Leaky Ducts. 
  6. Check proper ventilation. 
  7. Ensure no leak or crack in the room. 
  8. Keep the condenser unit under shade.
  9. Schedule regular maintenance checks for better AC health.


Follow this simple air conditioner maintenance tips checklist to enjoy a cool and comfortable home all summer. Remember, regular and consistent maintenance keeps your AC running smoothly and efficiently.


Why Choose Professional AC Services in Dubai?


Opting for a professional AC services company in Dubai is crucial as it ensures your cooling system works at its best, even during the peak summer hours. Our team possesses efficiency and expertise, and provides top-notch AC repair in Dubai, offering detailed air conditioning service tips and effective AC service tips specifically tailored to your demands. With our first-class air conditioner maintenance tips, you’re not only saving money by getting wasted on costly breakdowns but also prolonging the life span of your air conditioner unit.

We are not just limited to delivering expertise and professionalism at your doorstep but also ensure that your air conditioner services stay within budget by offering budget-friendly solutions. Explore valuable AC unit maintenance tips during our service visits to keep your AC in prime condition and running smoothly. So, trust AOne Technical for reliable and cost-effective AC repair in Dubai, and benefit from our immense knowledge and expertise in Air conditioner maintenance tips and first-class services. 


FAQs on DIY Air Conditioning Service/Maintenance:


Is air conditioning service necessary?

Yes, regular air conditioning service is necessary to ensure better performance, energy efficiency, and the long span of your air conditioner. 


Is it necessary to service AC every year?

Yes, servicing your Air conditioner yearly is important to maintain efficiency and avoid potential problems, ensuring reliable performance and prolonging its longevity.


When should AC be serviced?

An air conditioner should ideally be serviced at least once a year, before the start of summer to make sure it’s in good condition and performs well.


How to service an air conditioner at home?

To service an air conditioner at home, clean the air filters, check and clean the evaporator coils, and enhance the airflow by removing any obstructions around the unit.


How to do servicing of an air conditioner?

Air conditioning service tips include cleaning or replacing filters, inspecting and cleaning evaporator coils and fins, and checking refrigerant levels. Regularly following air conditioner maintenance tips can help prevent major issues and improve efficiency. 


What maintenance is required for an air conditioner?

Regular maintenance involves cleaning air filters, inspecting and cleaning coils, setting the thermostat, and making sure there are no leaks, cracks, or blockages.


What is the best way to maintain an AC unit?

The best way to keep your AC unit in fine condition is by following air conditioner maintenance tips, such as regular filter cleaning, yearly servicing by a professional HVAC technician, and removing debris and dirt from the unit.


What are the maintenance services required for an air conditioner?

Maintenance services include replacing filters, cleaning coils, checking refrigerant levels, and ensuring that the system is free of leaks or cracks. For complicated issues, consider seeking expert help from a professional AC repair in Dubai like AOne Technical.


How to clean inside an AC unit?

To clean inside an AC unit, turn off the power first, remove the cover, and gently clean the coils and fins using a soft brush. Following expert air conditioning service tips ensure detailed cleaning.

Open chat
Can we help you?